Valentine Quiltworks

Welcome to Valentine Quiltworks! 


An Explanation of the Process: From Start to Finish 


Machine quilting is the process of layering together a quilt top, batting, and backing, and then stitching through all of the layers with a decorative design. Unlike your sewing machine where you move the quilt through the machine, the quilting machine moves over the quilt! There are many steps in this process, and attention to detail is very important for the highest quality finished product. Below I have explained the process that I use to transform a quilt top into a quilt!  



The Consultation 


Make an Appointment: 


Congratulations! You have decided to have your quilt top professionally quilted, and you have come to the right place! Please contact me via phone or email, and I will answer any questions you may have. We will then set up an appointment for you to bring your quilt top and backing to my home studio. This is a good time to review the Quilt Prep page on this website, so your quilt top will be properly prepared!


I have a Gammill Statler Stitcher,  a top of the line computer guided quilting machine. I have taken many classes and spent long hours becoming proficient with the skills necessary to produce high quality machine quilting with a high level of attention to detail.  I do everything myself, and as you will learn here, there is a lot more to my job than just pushing a button!! 


Choose a Quilting Design: 


When you arrive for your appointment, we will go into my quilting studio. We will lay your quilt top out, discuss who it is for, how it will be used, and ideas you may have. It is time to choose a quilting design. I have several books of designs, and if you prefer, I can make a few suggestions. If you want a head start on this part of the process, please visit the Quilting Designs section of this website! I have many designs shown there, so you can get an idea of what is available. Of course, I have many more! If you would like to see what some of the designs look like quilted, please visit the Gallery.




The next part of your visit is to measure your quilt, and choose batting. I will take a rough measurement, the final price is determined by the exact measurement of the quilt, before it is quilted. I have several Quilters Dream products available, and we will discuss the look that you want and the type of batting you prefer. I no longer accept customer battings, please feel free to review the details on the Price List page of this website.




Quilting requires thread!  I have many solid colors to choose from, as well as varigated threads. We will consider the colors in the top and the backing, and whether you prefer the thread to blend, or show as an accent. We will audition several colors, and you choose the color you like! 


Your Cost Estimate:


I will figure a cost estimate that will be very close to the final cost. The final cost will sometimes be a little less than the estimate, if the quilt is well prepared, very flat, and the quilting process goes faster than expected.  I will give you an estimate of when your quilt will be finished, and will call you when it is ready to be picked up!


The whole consultation process takes anywhere from 20 minutes to whatever! I enjoy getting to know my customers, and I do not rush! And we usually end up chatting about fabric :)



The Quilting Process 




Now my real work starts! First, I have to prepare the machine. That entails cleaning, oiling, and occasionally some maintenance. The machine is a $35,000 investment so it is important to take good care of it! Then I wind bobbins, thread the machine, and check the tension.  I start the computer setup for the designs you have chosen by locating the designs in the computer. For an edge to edge design I decide on the approximate size, figure out how many repeats are needed for the width and length, and whether or not the design rows need to be nested. I make sure the design has not become distorted, and often I experiment on a practice piece so I know exactly how the design and density will look on your quilt. The exact size will be set after I have the exact measurements of your quilt. It depends on the design, the proportions of your quilt, and to some extent, the size of the smallest pieces in the quilt. It is easier to just make everything as big as possible, because it gets done faster. But I don't do that because I like to make sure the density is just right and there is plenty of quilting on the quilt so it will last a very long time! 




Next I prepare the quilt top and backing. I expect that you will have given your quilt top and backing a good pressing before you bring it to me. That means pressing the piecing seams accurately!  There are usually creases from being folded, and I like everything to be wrinkle free. A lot of machine quilters will skip this step, but I carefully press everything right before I load your quilt onto the machine. This step is important to me because it gives me a chance to identify problem areas, where there is fullness or other issues so I will know where they are and have a plan to deal with them.




I carefully measure the quilt in several places, both width and length. Based on these measurements, I  determine what the final dimensions of the quilt will be, and make slight adjustments to the measurements I entered into the computer earlier. Part of a quality quilting job is to keep everything straight and square all the way down the quilt. It is much easier to just put the quilt on the frame and quilt it into whatever shape it arrived in, but I want every quilt to be straight and square when it is finished!




After pressing, I carefully inspect the backing and check it to be sure it is square. That means the parallel sides are the same length, and the corners are square. A lot of machine quilters charge extra for this step, but I don't because I feel it is a necessary to insure a quality product. I check every backing, and almost every one needs to be squared up, even just a little. If you fold the backing in half, ends even, it should hang perfectly straight. You need to check both directions, side to side and top to bottom. The backing can be put on the frame unsquared, but it tends to pull, pucker and pleat, and I don’t want that to happen! The edges all need to be cut even and straight. If I need to size your backing, I might charge a small fee since it takes extra time to measure and calculate. As stated on the Quilt Prep page of this website, the backing needs to be 4”-5” larger than the top on every side, or a total of 8”-10” longer and 8”-10” wider than the top.




When I am satisfied that everything is just right, I mount the backing on the machine. This involves locating the centers of the top and bottom, and pinning them to the leaders. I roll it back and forth to be sure the backing is straight and flat.


The batting is cut from a large roll, and it usually has a few wrinkles in it. I put it in the dryer on delicate for about 10 minutes, and it is much nicer to work with! This is another extra step, it takes more time but the result is a smoother finished quilt.


I lay the batting on top of the backing, smooth it out, and baste straight across the top. Then I line up the quilt top with this stitching line, and measure, and baste it down. I position the sides of the quilt top so that they are perfectly square to the top edge, and baste down the sides. The smoothing, squaring, and basting, takes place every time I roll the quilt top after every row of quilting is finished, which is every 13"-20" of the quilt length, depending on the design height. Many quilters do not square up every row, because it takes time. But that can lead to problems at the bottom of the quilt, in the form of an uneven quilt bottom. I want that bottom edge to be perfectly straight and square, and the same width as the rest of the quilt!




Wow, it’s finally time to push the button! Many quilters with computer guided machines will start the machine quilting a row and then do something else while the row stitches. I NEVER leave your quilt unattended! You are paying me to quilt your quilt, and I take it very seriously. This is my chance to be sure your finished quilt is the best it can possibly be, and make sure everything stays square and straight. I stand by the machine the entire time it is running, for hours at a time, and I am able to manipulate the fabric with my hands and get it to stay exactly where I want it. This is especially important if your quilt has a bit of fullness anywhere in the piecing or the borders, and this is very common!


When the row is finished, the machine stops, and I have to roll, smooth, straighten, square, and baste. Then I take a peak underneath to be sure everything looks good on the back, and push the button again….. when I finally reach the bottom edge of the quilt I baste straight across, manipulate everything into place, and quilt the last row.


Final Inspection: 


When the quilting is finished, the quilt is unpinned from the leaders, and I trim all of the excess quilting thread ends. I inspect your quilt, and if requested, I will trim off the excess backing and batting.


The quilting process is finally done! This whole process takes anywhere from several hours to several days, depending on the size of your quilt and the complexity of the quilting. Some people can do it faster if they skip the extra steps. I am meticulous and want your finished quilt to be of the highest quality possible, and that takes extra time! 


Thank you for taking the time to read this, I hope you have learned something about all of the steps involved in the quilting process! I look forward to meeting you soon!


Susan Wood

(203) 214-0982




©Copyright 2006-2017 Valentine Quiltworks

All Rights Reserved





Back to Price List